b'AC MOTOR CONTROLMETAL ENCLOSED DOL STARTERS -ENCLOSED DIRECT-ON-LINETWO PHASE SOFT STARTERSSINGLE PHASE NA MOTOR STARTERS NATwo-phase controlled DIN rail mounting soft NA A range of enclosed Direct-On-Line motor A range of enclosed Direct-On-Line motor startersstarters suitable for motors rated up to 22kWstarters in steel IP55 enclosures which combine high performance and low costSoft starters offer soft acceleration and decelerationComplete and ready to use with thermal Options with and without isolator and supportand are controlled by microcontrolleroverload fitted for quick easy installing for motors from 5.5 kWto 11 kW.Three separately adjustable parameters, oneCompliant with standards: BSEN60947-Pt4-Moulded plastic case providing IP65 ingress protection for acceleration time, one for deceleration Sec 1, BSEN60529-1992, IEC947-4-1 NACompliant with standards IEC/ENNA time and also one for the start voltage NA60947-1 and IEC/EN60947-4-1Compact design, 45 mm up to 32A and 52.5 mm at 45A RF38 Overloads must be ordered separately to Protection IP20match motor current - See RS 685-1328135-9715 1,5kW135-9716 3kW725-5503 5.5kW 230VAC Coil 135-9717 5,5kW909-4085 0.75kW 5.5-8A - 240Vac 725-5516 7.5kW 230VAC Coil 135-9721 7,5kW909-4089 1.1kW 7-10A - 240Vac 725-5507 5.5kW 400VAC Coil 135-9718 11kW909-4098 1.5kW 10-13A - 240Vac 725-5525 5.5kW 230VAC Coil + Isolator 135-9719 15kW909-4091 2.2kW 13-18A - 204Vac 725-5529 5.5kW 400VAC Coil + Isolator 135-9720 22kWMETAL ENCLOSED DOL STARTERS -ENCLOSED STAR-DELTA MOTORPROPORTIONAL POWER THREE PHASE STARTERS CONTROLLERNA NA NA A range of enclosed Direct-On-Line motor Plastic cased Star-Delta motor starters with and without RS Pro single phase power controllers are designed to starters in steel IP55 enclosures isolator and suitable for motors from 11 kW to 30 kW control the load power in function of the input controlComplete and ready to use with thermal Moulded plastic case providing IP65 ingress protection for resistive and resistive-inductive loads, for automatic overload fitted for quick easy installingCompliant with standards IEC/ENtemperature control systems in electrothermal devices Compliant with standards: BSEN60947-Pt4- 60947-1 and IEC/EN60947-4-1The power controller is a contactless power energy electronic device which includes a thyristor connector Sec 1, BSEN60529-1992, IEC947-4-1 NAStarting time up to 12s and a maximumNA NAof 30 operations per hour and electronic gate trigger system (GTS) RF38 Overloads must be ordered separately to This allows the change of power delivered from the match motor current - See RS 685-1328 AC voltage source to the electric energy load in the function of the analogue or pulse driving signal value725-5541 11kW 400V Coil725-5553 15kW 400V Coil725-5566 22kW 400V Coil725-5563 30kW 400V Coil909-4076 3.7kW 5.5-8A 415V 3-phase 725-5575 11kW 400V Coil + Isolator909-4079 4.5kW 7-10A 415V 3-phase 725-5588 15kW 400V Coil + Isolator 902-8111 25A909-4073 5.5kW 10-13A 415V 3-phase 725-5585 22kW 400V Coil + Isolator 902-8120 40A909-4082 7.5kW 13-18A 415V 3-phase 725-5597 30kW 400V Coil + Isolator 902-8123 70AVisit rspro.com to order today! 17'